The Dresco Quick Tube inner tube, the new dual-end tube, allows you to replace a punctured tyre without removing the wheel, disconnecting the gear and/or brake cables, or disconnecting the e-bike’s electronics. This inner tube is therefore ideal for bikes with a closed chain guard or for e-bikes. Thanks to its high elasticity, the Dresco Quick Tube inner tube is suitable for a wide variety of tyre sizes. This inner tube is suitable for ETRTO sizes 28/47-406/635 (20 to 29 inches and a width of 1.10 to 1.75) and is fitted with a 47mm-high Presta (French) valve. Ideal to take with you on a bike ride and a quick and handy solution for a puncture on the go.

Replacing a flat tyre takes just a few minutes using only a pair of (plastic) tyre levers. Loosen one side of the outer tyre (on the rear wheel, it is easiest to loosen the side where the chain guard is not located) and remove the flat inner tube. Slide the new Dresco Easyfix between the tyre and the rim, thread the valve through the rim and simply pump it up. The two flat ends will slide over each other as you pump.